Strong gel glue 2 x 2 g

Suitable for:
Ideal for bonding small areas. Bonds most solid and flexible substrates, as well as many plastics such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), phenolic resins (Bakelite®), leather, porcelain, ceramic, metal, wood, cork, felt, textile (test first) and rubber. Only partially suitable for glass (after a certain time, the assembly becomes brittle and is therefore weakened).

Not suitable for:
Not suitable for PE, PP, silicone (Si) resins and rubbers, PTFE, Styrofoam, leather and fabric garments.

Before using strong glue:

Conditions of implementation:
Do not use at temperatures below +10°C. The glue responds best when the air humidity level varies between 50 and 70%.

Surface requirements:
The elements to be glued must be dry, clean, free of dust and grease and fit perfectly.

Pre-treatment of surfaces:
Dust, oil, grease, wax or any other separating agents must be completely removed from the surfaces to be joined. The best way to do this is to rub the components several times using suitable solvents, such as acetone (if this is suitable for the material - check beforehand!). In general, sanding metals and metal alloys with sandpaper or brushing or grinding them is quite sufficient.

Using strong glue:

Instructions for use:
1. To pierce the membrane, firmly twist the cap clockwise onto the tube. Tip: Do not press on the tube while piercing.
2. Unscrew the cap to reveal the applicator. Apply the glue directly from the tube, using the tip, as thinly as possible on one side (too much glue slows down the curing process considerably). Press the parts together immediately. After use, clean the tip with a dry cloth and replace the cap.

Tips:
When bonding in light humidity, drying time can be reduced by briefly exhaling on one of the parts to be joined. Best results are obtained when bonding is carried out at room temperature.

After using the strong glue:

Tasks/leftovers:
Remove excess glue immediately with a dry cloth or similar. After hardening, it is very difficult to remove glue stains. Acetone dissolves the glue only very slowly.

Storage conditions:
Store in a cool, dry and frost-free place. Storing the product at a temperature below +5 °C (in the refrigerator) ensures the longest shelf life.